Click an image below to launch a video player with several short training videos.

7.2 Tech Tips


7.1 Tech Tips

7.0 Tech Tips

6.2 Tech Tips

 

Note: The CGTech Tech Tip videos below require the TechSmith Codec. If the videos don’t play, download and install the free TSCC CODEC from TechSmith at www.TechSmith.com. Click on the “Download TSCC Codec” link.

Angled Heads Tool Manager

No description.

Version: 6.x | Size: 9mb | Download

Conditional Travel Limits

No description.

Version: | Size: 7mb | Download

Cut Multiple Stocks Multiple Setups

First setup cuts multiple parts, then each move to different “setup 2” locations.

Version: | Size: 23mb | Download

Cutting Into Fixture Allowance

No description.

Version: | Size: 12mb | Download

Define A Program Zero Or Work Offset Location

Defining G-code tables so the NC program cuts stock in the correct location.

Version: | Size: 12mb | Download

Double Click To Run Vericut

Double-click VcProject file to run VERICUT.

Version: 6.x | Size: 4mb | Download

G28G91Z0 Crashes Part

Modify machine config so G28G91Z0 moves Z-axis to full retract, instead of crashing part

Version: | Size: 7mb | Download

Ignore Unimportant Codes

Ignore unimportant NC program codes to eliminate warning messages.

Version: | Size: 15mb | Download

Measure Depth Of A Holdershank Hit Or Fixture Crash

Using X-Caliper to measure the extent of damage caused by these problems.

Version: | Size: 3mb | Download

Merge IP File

No description.

Version: | Size: 15mb | Download

Min Cutter Extension

No description.

Version: | Size: 20mb | Download

Multiple Stocks Progressive Loading

One NC program cuts several parts, all in various stages of machining

Version: | Size: 19mb | Download

NC Program Preview

No description.

Version: | Size: 3mb | Download

Okuma Travel Limits

No description.

Version: | Size: 13mb | Download

Multiple Setups

Multiple setups and master project files.

Version: | Size: 11mb | Download

OpenGL Display Options

OpenGL display options for Machine views.

Version: | Size: 52mb | Download

Optimize Milling Tools Cutting Soft Metals

Setup optimization of milling tools cutting soft metals, eg. Aluminum, Brass, Soft Cast Iron, etc.

Version: 6.2 | Size: 20mb | Download

Optimize Milling Tools Cutting Hard Metals

Setup optimization of milling tools cutting hard metals, eg. Titanium, Steel, Inconel, etc.

Version: 6.2 | Size: 22mb | Download

Optimizing Aircuts

No description.

Version: | Size: 12mb | Download

Optipath Learn Mode

Learn and optimize feeds and speeds from your tool path.

Version: | Size: 22mb | Download

Rotated Relation Workoffsets

No description.

Version: | Size: 12mb | Download

Setup Plan

No description.

Version: | Size: 4mb | Download

Siemens Orivect Motion

No description.

Version: | Size: 2mb | Download

Syntax Check

No description.

Version: | Size: 3mb | Download

Tapping

No description.

Version: | Size: 3mb | Download

Tool Holders

Working with tool holders.

Version: | Size: 13mb | Download

Tool Manager Tips For Defining Simple Milling Tools

Milling Tool Wizard with Stack and Automatic Gage Offset Z options for easy milling tool assemblies.

Version: 7.x | Size: 12mb | Download

Tooling Hole-to-pin

Locate cut stock via tooling hole-to-pin (CSYS method).

Version: | Size: 19mb | Download

Travel Limits By Groups

No description.

Version: | Size: 11mb | Download

Turning

No description.

Version: | Size: 5mb | Download